Classified

Dual Pivot SOLD TO TONY

Postby Letsmakeadeal » Mon Dec 31, 2018 5:22 pm

Sold,.......,...I have a dual pivot set I don't need since I switched to the Gimbal Fatboy. Skid plate will need new tape and has typical hairline from use.

$100.00 SOLD

Can send a pic if you want just PM.
Last edited by Letsmakeadeal on Tue Jan 22, 2019 1:37 pm, edited 2 times in total.
User avatar
Letsmakeadeal
Senior Member
 
Posts: 554
Joined: Fri Aug 29, 2014 3:42 pm
Location: Texas

Re: Classified

Postby mreeter » Sun Jan 06, 2019 4:40 pm

SOLD-Rogue Audio Ares "Magnum" Phono Preamp-SOLD

Excellent Condition Rogue Ares Ares Magnum Upgraded Phono Preamp. I can not see one blemish or mark anywhere, exceptionally clean. A solid 9/10 on the Audiogon Scale.

The Stock Ares is a superb Phono Stage as is, the Magnum Upgrades take it to another level.

The Upgrades include;

A better step up transformer, "Blue" Cinemag 1254, that provides more gain (about 10dB more) and better sound.
The Ares Magnum uses better inner-stage coupling caps.
PRP resistors in critical spots
Improved internal wiring
Improved RCA jacks

The Ares will drive about any Cartridge on the Market today utilizing it's pure Tube Circuit, accepts 2-12AU7 & 2-12AX7's. Fitted with a set of like new JJ Tubes, Easy access to Dip Switches, and very adjustable, including a "0" Capacitance Setting.

MM
Dip –1 and Dip-4 are used to set the cartridge loading according to the following table:
A 500 ohms
B 1,000 ohms (1K)
C 47,000 ohms (47K)
D 100,000 ohms (100K)
None 1,000,000 (1 Meg)

MC (Medium Output)
A 75 ohms
B 150 ohms
C 300 ohms
D 1,000 ohms (1K)
None 2,500 ohms (2.5K)

MC (Low)
A 20 ohms
B 50 ohms
C 100 ohms
D 300 ohms
None 1,100 ohms (1.1K)

The External Power Supply makes for a very Quiet Stage.

$1695. OBO

UPS Shipping at cost, pm me for a quote.

Thanks for looking!
Last edited by mreeter on Mon Jan 14, 2019 8:35 pm, edited 5 times in total.
VPI Classic Signature SE
VPI SDS
VPI 16.5
ModWright LS-100 Linestage Preamp
ModWright PH 9.0 Phono Preamp
VAS Audio Citation II Monoblock Amps
Polk Audio SDA SRS 3.1TL
Dual Rythmik F8 Subs
MIT S1 Shotgun/Audio Sensibility Wires
User avatar
mreeter
Senior Member
 
Posts: 495
Joined: Wed Nov 05, 2014 9:16 pm

WTB: 2-Step Motor Pulley for Classic 1

Postby Tlarwa » Mon Jan 07, 2019 11:10 am

NO LONGER NEEDED! Anyone sitting on a 2-step pulley that you aren't using (maybe because you upgraded to the HRX pulley)? The threads in the plastic body of mine have stripped. I really just need the plastic pulley (the brass insert is fine), but will take the entire pulley if available. This is for the last generation Classic 1 with the standard motor. Let me know if you do and what you want for it. I check my PMs. Thanks!
Tom
Last edited by Tlarwa on Fri Feb 08, 2019 11:48 am, edited 1 time in total.
Handbuilt SET, VPI Classic 1, AT-33PTG, Dynavector P75, hand-built passive pre, Blair Chapman built SRPP active pre, handbuilt folded open baffle floorstanders, Kimber Kable wires, a digital front end that I never listen to!
Tlarwa
Member
 
Posts: 79
Joined: Mon Jun 13, 2016 1:02 pm

FS: Anthem MRX510

Postby madrac » Sun Jan 13, 2019 9:52 am

Anyone interested in an Anthem MRX510 in excellent condition.

I bought it new from an authorized dealer locally in 2015. Used as a preamp only until 2017 when I purchased an MRX720.

Includes accessories, manual, and ARC1 kit. Asking US899+shipping from Houston Texas. Will ship in original Anthem box.

IMG_0763.JPG
IMG_0763.JPG (1.54 MiB) Viewed 1213 times

IMG_0769.JPG
IMG_0769.JPG (2.1 MiB) Viewed 1213 times

IMG_0756.JPG
IMG_0756.JPG (2.05 MiB) Viewed 1213 times

IMG_0762.JPG
IMG_0762.JPG (1.63 MiB) Viewed 1213 times
madrac
Senior Member
 
Posts: 126
Joined: Sun Jan 03, 2016 9:36 am

Balanced and single ended VPI junction Boxes

Postby Letsmakeadeal » Sun Jan 13, 2019 8:54 pm

I have an extra Balanced VPI junction box available....Pretty sure wire is Discovery...A few minor signs of use...175.00 New 299.95

I also have an extra Single ended box 125.00

PayPal is fine

Shipping is 8.00 for USPS Priority Small Box
User avatar
Letsmakeadeal
Senior Member
 
Posts: 554
Joined: Fri Aug 29, 2014 3:42 pm
Location: Texas

Re: Classified

Postby mike_ » Sat Jan 19, 2019 7:50 am

WTB: Soundsmith Counter Intuitive and VPI Dual Pivot assembly. Please PM me or reply here if you can help. Thanks!
mike_
Jr. Member
 
Posts: 21
Joined: Wed Jan 16, 2019 3:07 am

Re: WTB.....HRX Pulley

Postby Dizastical » Mon Jan 21, 2019 11:35 am

Hey guys I'm looking to replace my primes 2 step pulley with an HRX one. Anyone have one they'd like to sell?
VPI Prime / SoundSmith Zephyr MK III / Phoenix Eagle PSU / Phoenix RoadRunner Tach / Musical Surroundings NOVA III / Musical Fidelity M6si / Furman Elite-15 PFi / Blue Jeans Cables / Martin Logan Motion 60XT / ProJect VC-S MK II
User avatar
Dizastical
Member
 
Posts: 27
Joined: Fri Nov 23, 2018 3:51 pm

Classic Signature Feet & Symposium Inserts

Postby RHSims » Wed Jan 23, 2019 6:35 pm

Looking for $350 + shipping. Original box from Symposium weighs 1.0 lb.

Thanks
RHSims
Member
 
Posts: 29
Joined: Sat Mar 14, 2015 12:37 am

SoundSmith Counter Intuitive & Dual Pivot Kit

Postby Shep » Mon Jan 28, 2019 11:47 am

Recent Fatboy gimbal purchase means I no longer need either of these.
SS CI includes unused scale for counter weight = $30.
DP kit skid plate is still very tacky and will hold firmly & includes allen key for set screw = $100.
I'll pay shipping...please PM if interested.

SOLD 1/28/19

Count_Pivot.jpg
Count_Pivot.jpg (414.22 KiB) Viewed 713 times
Last edited by Shep on Mon Jan 28, 2019 10:24 pm, edited 1 time in total.
Shep
Jr. Member
 
Posts: 12
Joined: Wed Nov 30, 2016 8:47 am

Re: WTB: 2-Step Motor Pulley for Classic 1

Postby Dizastical » Mon Jan 28, 2019 9:41 pm

Tlarwa wrote:Anyone sitting on a 2-step pulley that you aren't using (maybe because you upgraded to the HRX pulley)? The threads in the plastic body of mine have stripped. I really just need the plastic pulley (the brass insert is fine), but will take the entire pulley if available. This is for the last generation Classic 1 with the standard motor. Let me know if you do and what you want for it. I check my PMs. Thanks!
Tom

I have one I just took off my Prime motor. I replaced it with a HRX pulley. Its about 8 months old. All 3 Allen bolts hold tight and are not stripped. Make me an offer.
VPI Prime / SoundSmith Zephyr MK III / Phoenix Eagle PSU / Phoenix RoadRunner Tach / Musical Surroundings NOVA III / Musical Fidelity M6si / Furman Elite-15 PFi / Blue Jeans Cables / Martin Logan Motion 60XT / ProJect VC-S MK II
User avatar
Dizastical
Member
 
Posts: 27
Joined: Fri Nov 23, 2018 3:51 pm

PreviousNext

Return to Mat's Corner

Who is online

Users browsing this forum: No registered users and 1 guest

cron

x