Classified

For sale: dustcover for VPI Classic

Postby Golear » Fri Oct 05, 2018 7:13 pm

I have a dust cover that will fit a VPI Classic, in good condition. $100. I'm in Portland, Oregon.
Golear
Senior Member
 
Posts: 243
Joined: Wed Nov 30, 2016 4:51 pm

Re: FS: JMW 3D 10" Tonearm Wand and Base

Postby thegage » Mon Oct 08, 2018 4:26 pm

thegage wrote:
thegage wrote:About eight months old with light use. I bought it to use with other parts to build up a player for a second system but I don't really use it and I don't run multiple cartridges in my main system, so I'm selling to use funds elsewhere.

Wiring is what was standard at the time of purchase, non-integral finger lift, 160gm counter-weight, and it has a counter-intuitive installed on the weight. A couple of very faint marks on the top of the headshell from cartridge installation, but otherwise in excellent condition.

NOTE: This tonearm is supplied with smaller side weights because it was used with an older VTA-on-the-fly tower (bigger weights won't clear the side of older towers). It didn't matter to me because I used a second pivot. If the smaller weights matter to you it's a good excuse to buy the second pivot, which makes a noticeable improvement.


John K.

JMW 3D.jpg


JMW Weight.jpg


Maybe this will spur more interest: Adding the VTA-on-the-fly base for a package. Includes the tonearm, base, Anti-Skate, and 2nd pivot. (Note: picture shows older tonearm rest, but will include correct rest for the 3D arm.)


Tonearm Base.jpg


Someone really should snap these up.

Reduced to $1800 shipped.
TNT Jr, Classic platter, Eminent Technology ET-2, Moon 310LP, PrimaLuna ProLogue Premium Preamp, PrimaLuna ProLogue Five, Golden Ear Triton 2+, Martin Logan Depth
thegage
Senior Member
 
Posts: 430
Joined: Wed Sep 17, 2014 9:41 am

Re: Classified

Postby Packgrog » Mon Oct 08, 2018 4:40 pm

A couple of modest items that I have available and need to offload to fund a replacement cartridge:

https://www.usaudiomart.com/details/649 ... arms-120g/
https://www.usaudiomart.com/details/649 ... cable-07m/
VPI Scout Jr., Audiomods Classic, Audio Technica AT33PTG/II, Phoenix Engineering Falcon w/ DIY Arduino Uno Tachometer, Musical Surroundings Nova Phonomena, RME Babyface Pro
User avatar
Packgrog
Senior Member
 
Posts: 320
Joined: Tue Mar 01, 2016 2:37 pm
Location: Philadelphia Area

SOLD: Unused Ortofon A95 MC cartridge

Postby miner » Wed Oct 10, 2018 2:09 pm

***SOLD***

Bought new 4 months ago, for spare JMW3D arm which I recently sold. This cartridge has never been used. $3900. Purchased from VPI when they were offered on the site.

Harry/VPI sent me a new A95 to replace my original with a slightly skewed cantilever.
Attachments
A95-7.jpg
A95-7.jpg (51.39 KiB) Viewed 1485 times
A95-6.jpg
A95-6.jpg (69.23 KiB) Viewed 1485 times
A95-5.jpg
A95-5.jpg (66.62 KiB) Viewed 1485 times
A95-2.jpg
A95-2.jpg (70.95 KiB) Viewed 2380 times
Last edited by miner on Mon Dec 10, 2018 3:27 pm, edited 2 times in total.
McIntosh C2300 pre; McIntosh MC452 amp; McIntosh MCD500 SACD; VPI Aries 3 with 3D arm and Ort. Cadenza Black MC cartridge; Manley Chinook SE; PS Audio P5 reg.; VPI SDS; Pioneer RT707 R2R; Nakamichi ZX-7 cass.; Sf Electa Amator III; Sf Gravis II sub
miner
Senior Member
 
Posts: 313
Joined: Mon Feb 09, 2015 3:39 pm

Re: FS: JMW 3D 10" Tonearm Wand and Base

Postby thegage » Thu Oct 11, 2018 1:52 pm

thegage wrote:
thegage wrote:
thegage wrote:About eight months old with light use. I bought it to use with other parts to build up a player for a second system but I don't really use it and I don't run multiple cartridges in my main system, so I'm selling to use funds elsewhere.

Wiring is what was standard at the time of purchase, non-integral finger lift, 160gm counter-weight, and it has a counter-intuitive installed on the weight. A couple of very faint marks on the top of the headshell from cartridge installation, but otherwise in excellent condition.

NOTE: This tonearm is supplied with smaller side weights because it was used with an older VTA-on-the-fly tower (bigger weights won't clear the side of older towers). It didn't matter to me because I used a second pivot. If the smaller weights matter to you it's a good excuse to buy the second pivot, which makes a noticeable improvement.


John K.

JMW 3D.jpg


JMW Weight.jpg


Maybe this will spur more interest: Adding the VTA-on-the-fly base for a package. Includes the tonearm, base, Anti-Skate, and 2nd pivot. (Note: picture shows older tonearm rest, but will include correct rest for the 3D arm.)


Tonearm Base.jpg


Someone really should snap these up.

Reduced to $1800 shipped.


SOLD!
TNT Jr, Classic platter, Eminent Technology ET-2, Moon 310LP, PrimaLuna ProLogue Premium Preamp, PrimaLuna ProLogue Five, Golden Ear Triton 2+, Martin Logan Depth
thegage
Senior Member
 
Posts: 430
Joined: Wed Sep 17, 2014 9:41 am

Re: For sale: dustcover for VPI Classic

Postby Golear » Fri Oct 12, 2018 12:50 am

Golear wrote:I have a dust cover that will fit a VPI Classic, in good condition. $100. I'm in Portland, Oregon.


Sold.
Golear
Senior Member
 
Posts: 243
Joined: Wed Nov 30, 2016 4:51 pm

Re: Classified

Postby aztwang » Mon Oct 15, 2018 1:33 pm

Dust cover that fits VPI Classic 3 and probably other classics too. Great condition!!

$140.00 plus shipping...

I'm out of Phx, AZ

Cheers...Don. WITHDRAWN
Last edited by aztwang on Sun Oct 28, 2018 11:46 pm, edited 1 time in total.
Primaluna Dialogue Premium HP-- EL34- Marantz TT15-S1-- Sumiko Blackbird
Mobile Fidelity Studio Phono stage-- Blue Jeans Interconnects & Blue Jeans Speaker cable--
Goldenear Triton 1’s
User avatar
aztwang
Member
 
Posts: 47
Joined: Thu May 31, 2018 2:09 pm
Location: Sun City West, AZ

FS: SSCI and dual pivot

Postby miner » Mon Oct 22, 2018 2:34 pm

I have for sale a Soundsmith Counterintuitive . Leftovers from my JMW 3D trade-in towards the Fatboy. $30 for the SSCI. Buyer pays fees and shipping.
Last edited by miner on Mon Nov 05, 2018 11:14 am, edited 2 times in total.
McIntosh C2300 pre; McIntosh MC452 amp; McIntosh MCD500 SACD; VPI Aries 3 with 3D arm and Ort. Cadenza Black MC cartridge; Manley Chinook SE; PS Audio P5 reg.; VPI SDS; Pioneer RT707 R2R; Nakamichi ZX-7 cass.; Sf Electa Amator III; Sf Gravis II sub
miner
Senior Member
 
Posts: 313
Joined: Mon Feb 09, 2015 3:39 pm

Re: Classified

Postby aztwang » Thu Oct 25, 2018 1:06 am

Miner

Do you still have the Dr. Feikert protractor??

Thank you

Don
Primaluna Dialogue Premium HP-- EL34- Marantz TT15-S1-- Sumiko Blackbird
Mobile Fidelity Studio Phono stage-- Blue Jeans Interconnects & Blue Jeans Speaker cable--
Goldenear Triton 1’s
User avatar
aztwang
Member
 
Posts: 47
Joined: Thu May 31, 2018 2:09 pm
Location: Sun City West, AZ

Re: Classified

Postby miner » Thu Oct 25, 2018 10:46 am

***SOLD***

Don,
Still have the protractor - I send you an email.

kevin
McIntosh C2300 pre; McIntosh MC452 amp; McIntosh MCD500 SACD; VPI Aries 3 with 3D arm and Ort. Cadenza Black MC cartridge; Manley Chinook SE; PS Audio P5 reg.; VPI SDS; Pioneer RT707 R2R; Nakamichi ZX-7 cass.; Sf Electa Amator III; Sf Gravis II sub
miner
Senior Member
 
Posts: 313
Joined: Mon Feb 09, 2015 3:39 pm

PreviousNext

Return to Mat's Corner

Who is online

Users browsing this forum: No registered users and 2 guests

x