Dual Phase SDS power supply

Re: Dual Phase SDS power supply

Postby weust » Wed Feb 22, 2017 3:24 pm

Looks nice and interesting.
Too bad most items are in the USA, like the stereo amp part on ebay.
Shipping is 7 USD higher then the what the item is sold for.
Meaning, 15 for the item, 22 for the shipping...

Would love to have just the board and the parts list so for stuff like that.
VPI Classic 3 Rosewood with 3D tonearm | Koetsu Black | MIT Magnum M1 phono cable | Devialet 400 | Marten Miles 5 | Audio Research CD2 | Intel NUC streamer
User avatar
weust
Member
 
Posts: 83
Joined: Sat Feb 20, 2016 6:05 pm

Re: Dual Phase SDS power supply

Postby Ducky » Wed Feb 22, 2017 3:26 pm

If I didn't miss anything:

SG4 PCB $15
SG4 Parts $32
MK154 Amp $15
Pwr trans $24
Output trans $19.50 x 2
Case $86 (includes $39 shipping from China)
Lighted SWs $15 x 3

That comes to $256 plus miscellaneous hardware, wire, solder etc.

I already had a toggle switch for the speed control, the on/off switch and an AC outlet, but together, those parts might be $5-$7.
Ducky
Member
 
Posts: 77
Joined: Tue Jan 12, 2016 6:15 pm

Re: Dual Phase SDS power supply

Postby elader » Wed Feb 22, 2017 4:11 pm

do you work for beer?
VPI Prime, Benz Micro Glider, Phoenix tach, VPI SDS, Parks SUT
Audible Illusions Modulus 3A, Primaluna Prologue Five
REGA Apollo as transport, PS Audio Digital Link III DAC
KEF R300, pangea stands, SVS SB12 sub
Bluejean audio cables, Silnote AC cables
User avatar
elader
Senior Member
 
Posts: 224
Joined: Mon Mar 02, 2015 12:28 pm

Re: Dual Phase SDS power supply

Postby Cat5plus » Wed Feb 22, 2017 4:32 pm

Great Job! The rectangular cut outs are a bear to do ! Looks like you even mounted the display flush with the front panel. Not an easy task with out a massive machine punch.
VPI Classic Signature 3D, Lyra Titan i, Ortofon MC A90, Eagle, Roadrunner, Pass Labs X-1 pre, Pass Labs X ono Phono, Pass Labs X 250.5, dcs/Berkeley digital, B&W 805D, JL Audio Fathom sub, Cables: Nordost, Siltech.
User avatar
Cat5plus
Member
 
Posts: 65
Joined: Mon Oct 24, 2016 12:36 pm

Re: Dual Phase SDS power supply

Postby spinblackcircle » Wed Feb 22, 2017 5:12 pm

Just in case no one realized who came up with the design, it's Bill from Phoenix Engineering. While he may be retired, he is still active in the DIY community.

Interesting project that he gave away for non-commercial use. Thanks Bill! He does state that this is not at the Falcon/Eagle/Roadrunner level.

I might have to brush up on my soldering skills. :idea:
VPI Prime/Grado Reference Master, VPI 16.5 RCM, Audio Research LP1, Audio Research VSI60, Martin Logan Electromotion ESL, ClearDay and Audio Sensibility Cables
User avatar
spinblackcircle
Senior Member
 
Posts: 539
Joined: Wed Nov 05, 2014 3:09 pm
Location: Boston, MA

Re: Dual Phase SDS power supply

Postby JohnCh » Wed Feb 22, 2017 5:53 pm

Given Bill has retired, and (apparently) didn't sell the IP, I wonder if someone could convince him to share those plans with the DIY community?

BTW +1 to all the compliments on the power supply. Really nice work!
VPI Classic Signature, VAS Nova Signature, Lehmann Black Cube SE II, Oppo BDP-105, VTL 2.5 w/NOS tubes, Channel Islands Audio E200S, Magnepan 1.7 w/Mye stands, REL Strata III, Audio Sensibility Impact SE & Clear Day Double Shotgun cables
JohnCh
Member
 
Posts: 89
Joined: Thu Mar 10, 2016 10:53 am

Re: Dual Phase SDS power supply

Postby Ducky » Wed Feb 22, 2017 6:25 pm

elader wrote:do you work for beer?


No Beer No Work.jpg
No Beer No Work.jpg (48.4 KiB) Viewed 808 times
Ducky
Member
 
Posts: 77
Joined: Tue Jan 12, 2016 6:15 pm

Previous

Return to Customer Pictures

Who is online

Users browsing this forum: No registered users and 3 guests

x