New VPI feet

Re: New VPI feet

Postby Waxxy » Fri Sep 13, 2019 12:28 pm

madrac wrote:
Khenegar wrote:Edw: can u tell me if these new feet will fit the classic1 table? Thanks



Also, curious if the Symposium Classic footer inserts work with these feet?


The Symposium footer inserts and the new VPI feet are two different concepts altogether. The Symposium inserts work by providing a continuous path for vibrations to exit the TT and down to whatever platform the TT is sitting on. The new VPI feet do the exact opposite. The VPI feet 'float' the TT so that is has less connection to the platform below it. There is no need to combine the two concepts, and in fact, either one on it's own should function better than the two combined.
User avatar
Waxxy
Senior Member
 
Posts: 230
Joined: Mon Aug 25, 2014 10:16 pm

Re: New VPI feet

Postby madrac » Fri Sep 13, 2019 4:42 pm

thanks, Waxxy.
I like the look of the new feet, but will likely stick with the original classic feet + Symposium inserts.
madrac
Senior Member
 
Posts: 179
Joined: Sun Jan 03, 2016 9:36 am

Re: New VPI feet

Postby Khenegar » Sun Sep 15, 2019 5:56 pm

Can anyone tell me if these new designed feet for the VPI turntables described in this article are returnable if they don’t work as described ? I’ll be mounting them on a classic 1 table. Thank u
Khenegar
Senior Member
 
Posts: 164
Joined: Wed Sep 10, 2014 1:14 am

Re: New VPI feet

Postby MOON » Sun Sep 15, 2019 9:54 pm

This company now makes an adaptor which attaches their air bladder footer to any VPI table.
https://www.theanalogdept.com/images/spp6_pics/Whats Under/Pneuance/kit shot_1.jpg

The adaptor is shown attached to the air bladder footer in this Stereo show video posted on analog planet. It's about 24minutes into the video. Have a look.
https://www.analogplanet.com/content/rm ... -and-three
Classic 4, 12"3d, hrx pulley, 3 belts, dual pivot, sds, Pneuance NP-2 Peunmatic footers, Lyra Kloes, Waynes Perifery Ring 3.8 lb, Stillpoint LPI , Simaudio 610 Evolution PS, Audio Sensibility silver statement cable, Tru lift & sweep
MOON
Senior Member
 
Posts: 341
Joined: Mon Oct 06, 2014 6:14 pm

Re: New VPI feet

Postby 10ovr » Mon Sep 16, 2019 10:56 am

MOON wrote:This company now makes an adaptor which attaches their air bladder footer to any VPI table.
https://www.theanalogdept.com/images/spp6_pics/Whats Under/Pneuance/kit shot_1.jpg

The adaptor is shown attached to the air bladder footer in this Stereo show video posted on analog planet. It's about 24minutes into the video. Have a look.
https://www.analogplanet.com/content/rm ... -and-three

MOON, the first link is not working ?? 404
10ovr
Senior Member
 
Posts: 1060
Joined: Wed Nov 12, 2014 1:22 pm
Location: Fountain Hills AZ

Re: New VPI feet

Postby spinblackcircle » Mon Sep 16, 2019 12:03 pm

10ovr wrote:
MOON wrote:This company now makes an adaptor which attaches their air bladder footer to any VPI table.
https://www.theanalogdept.com/images/spp6_pics/Whats Under/Pneuance/kit shot_1.jpg

The adaptor is shown attached to the air bladder footer in this Stereo show video posted on analog planet. It's about 24minutes into the video. Have a look.
https://www.analogplanet.com/content/rm ... -and-three

MOON, the first link is not working ?? 404


Here ya go:

Image
VPI Prime/Grado Reference Master, VPI 16.5 RCM, Audio Research LP1, Audio Research VSI60, Ryan Speakers R630, ClearDay and Audio Sensibility Cables
User avatar
spinblackcircle
Senior Member
 
Posts: 659
Joined: Wed Nov 05, 2014 3:09 pm
Location: Boston, MA

Previous

Return to News

Who is online

Users browsing this forum: No registered users and 3 guests

x