Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
7" Adapter for Prime?
#11
I am sure for most VPI owners, modifying your gear in your own personal machine shop is an option. For me, I chose these:

Literally, the best 45 adapters I have ever used. They are molded to clip into the sides of the record, and facilitate no modification of my clamp and are as thick as the record. I bought 50 for less than 20 bucks delivvered

https://45rpmrecordadapters.com/

[Image: InsertAdapters_NewGroupShot_2775_a9d6f0c...1589143900]

Also, these adapters are from the bygone era of stacker players; that is why they have indentations at the end of the adapter

[Image: 557.jpg]
Reply
#12
(05-17-2022, 04:12 PM)Peter 99 Wrote: I am sure for most VPI owners, modifying your gear in your own personal machine shop is an option. For me, I chose these:

Literally, the best 45 adapters I have ever used. They are molded to clip into the sides of the record, and facilitate no modification of my clamp and are as thick as the record. I bought 50 for less than 20 bucks delivered  

https://45rpmrecordadapters.com/

Also, these adapters are from the bygone era of stacker players; that is why they have indentations at the end of the adapter

But Peter!!  You were the one looking for an alternative!!  You mean that I modified my record clamp for nothing!!???  All along you were okay with the 45 adapters? hahahahahhahaha  Big Grin Big Grin

Anyway, thanks for the link... I ended up ordering a few of those adapters.... and I do not have 45s!!
Whoa listen to the music...

Wachuko
VPI Scoutmaster Refurbish, Prime Signature Motor (300 rpm), Prime Aluminum (20 lbs) Platter and Bearing, Delrin Record Clamp, JMW 9 3D Arm with Sumiko Blue Point No.2, Upgraded Classic Feet, Periphery Ring Clamp
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)